| |
Product SKUs |
| |
MBD-X7DCA-i-O |
X7DCA-i(Standard Retail Pack) |
| |
Physical Stats |
| |
Form Factor |
Extended ATX |
| Dimensions |
13.05" x 12.075 " (33.15cm x 30.67cm) |
| |
Processor/Cache |
| |
CPU |
Dual 771-pin LGA Sockets |
| Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: |
| Quad-Core Intel® Xeon®Processor |
| 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.20 GHz |
| Dual-Core Intel® Xeon®Processor |
| 5200/5100 sequence (Wolfdale/Woodcrest processor)up to 3.40 GHz |
| System Bus |
1333 / 1066 MHz system bus |
| Operating System Software |
Supports 64-bit Operating Systems |
| Supports 32-bit Operating Systems |
| |
System Memory |
| |
Memory Capacity |
Six 240-pin DIMM sockets |
| Supports up to 48GB 667/533MHz DDR2 ECC Register memory |
| Memory must be populated in pairs |
| Memory Type |
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage |
1.8V only |
| Error Detection |
Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
| |
On-Board Devices |
| |
Chipset |
Intel® 5100 (San Clemente) chipset |
| Intel® ICH9R + PXH-V |
| SATA |
Intel ICH9R SB SATAII Controller |
| RAID 0, 1, 5, 10 support (Windows only) |
| RAID 0, 1, 10 support (Linux) |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
| 200-pin IPMI slot (SIMLP) |
| (Optional: AOC-SIMLP-B) |
| (Optional: AOC-SIMLP-3) with 3rd LAN support |
| NOTE:KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
| Network Controllers |
Intel® Dual 82573V/L Gigabit Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® I/OATsupport for fast, scaleable, and reliable networking |
| Audio |
High Definition 7.1 Channel Audio |
| Super I/O |
Winbond 83627DHG chip |
| Clock Generator |
CK505 chip |
| |
Input / Output |
| |
Serial ATA |
Six Serial ATA ports |
| Six SATA hard drives supported |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card |
| Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy |
1 Floppy controller; 1.44 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
4x USB rear ports |
| 6x USB internal header |
| 10 total USB ports, 2.0 Compliant |
| Audio |
High Definition 7.1 Channel Audio |
| Line-in / Line-out / Microphone Ports |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Port / Header |
1 Fast UART 16550 serial port |
| 1 Header |
| Parallel Port |
1x ECP / EEP Parallel Port |
| |
Chassis ( Optimized for X7DCA-i) |
| |
Tower / 4U Rackmount |
CSE-743TQ-865 |
| CSE-743TQ-865-SQ (OEM Only) |
| CSE-743T-645 |
| Important Chassis Notes |
To ensure system stability, a 500W (minimum) ATX power supply |
| [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
Expansion Slots |
| |
PCI-Express |
1 (x16) PCI-e slot |
| 1 (x4) PCI-e (using x16) slot |
| PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
| PCI |
2x 32-bit 33MHz PCI (5V) slots |
| |
System BIOS |
| |
BIOS Type |
8Mb Flash EEPROM with Phoenix ® BIOS |
| BIOS Features |
Plug and Play (PnP) |
| DMI 2.3 |
| PCI 2.2 |
| ACPI 1.0/2.0 |
| USB Keyboard support |
| Hardware BIOS Virus protection |
| |
Management |
| |
Software |
Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 |
| Super |
| Doctor III |
| Watch Dog |
| NMI |
| Power Configurations |
ACPI / ACPM Power Management |
| Main Switch Override Mechansim |
| Wake-On-Ring (WOR) header |
| Wake-On-LAN (WOL) header |
| Keyboard Wakeup from Soft-Off |
| CPU Fan auto-off in sleep mode |
| Power-on mode for AC power recovery |
| Internal/External modem remote ring-on |
| Suspend to RAM (STR) |
| |
PC Health Monitoring |
| |
CPU |
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset |
| CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN |
Eight 4-pin fans |
| 8x fans with tachometer monitoring |
| Status monitor for speed control |
| Status monitor for on/off control |
| Support for 3-pins |
| Low noise fan speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Temperature |
Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| Thermal Control for 8x Fan Connectors |
| PSU I2C temperature sensing logic |
| Thermal Monitor 2 (TM2) support |
| PECI |
| LED |
CPU / System Overheat LED |
| Suspend-state Indicator LED |
| +5V Standby alert LED |
| Other Features |
Chassis Intrusion Detection |
| Chassis Intrusion Header |
| SDDC Support |
| |
Operating Environment / Compliance |
| |
RoHS |
RoHS Compliant 6/6, Pb Free |
| Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F) |
| Non-operating Temperature: -40° to 70°C (-40° to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5 to 95% (non-condensing) |
